|
|
 |
|
|
|
 Stationary Brush Station, Type BHB EBW |
|
|
Design
|
|
|
Stationary brush station for the wash of the sides and optionally roof and skirt areas of trains in drive through mode.
In “Pendolino” version the side brush is divided in an upper and a lower part to enable the wash of “round-shaped” train bodies.
The station consists of two stationary brush units for the side brushes located at either side of the track on foundations (by builder).
Control components are housed in a switch cabinet on the side brush column.
|
|
All steel parts are especially painted in order to ensure a permanent protection against corrosion. Movable parts, e.g. bearings in direct spray area, as well as the spraying system are made of stainless steel.
Electronically, the station is usually integrated in a whole train wash system with other wash-, water- and water recycling aggregates. The whole system is PLC-based with several options which can be created to the customer`s wishes, e.g. Touch screen display, PC-system, Registration of operating data,…
|
|
|
|
|
|
| Please, drive with the mouse over the particular components for more details! |
 |
|
|
Technical data (per pair of brush station):
|
|
| Distance between middle of foundation: |
|
optimum: width of vehicle +1,8mtr |
| Foundation size: |
|
app. 800 x 800 mm |
| Weight: |
|
approx. 800-1200 kg per brush unit, depending on size of side brush |
| Electrical supply: |
|
6 kW |
| Electrical supply roof edge brushes: |
|
4 kW |
| Electrical supply skirt brushes: |
|
2,5 kW |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
